CyberScan multi-parameter portable meters
Choose Models for offer request
Intended
- Measurement of pH, conductivity, temperature and TDS
- Non-sinking housing
- Linear temperature compensation (conductivity)
- Waterproof protective housing
- Easy automatic multi-point calibration
- Automatic pressure and temperature compensation
- Automatic change of measurement ranges (AutoRange)
- Energy saving switch (Auto-Off)
- Freeze measurement value on the display
- Auto-monitoring after switching on
- Available in complete case sets
- Battery powered
Characteristic
Available Models
The CyberScan multi-parameter portable meter is used to measure pH, conductivity, temperature and TDS.
To ensure the best resolution in conductivity measurements, auto-ranging technology is used.
With the Hold function, the device temporarily pauses reading for easy viewing and recording.
An automatic shutdown saves battery power after use.
Auto diagnostics with message codes for easy troubleshooting are used.
The meter features a large, easy-to-read LCD display for optimal viewing with user-friendly icons.
The combination multi-sensor immersion probe has a 3-meter cable so there is no need to change measurement modes during operation.
Porównanie dostępnych modeli:
| Technical specifications | PC 10 | PC 300 |
| The pH range | 0,00 to 14,00 pH | -2,00 to 16,00 pH |
| Resolution and accuracy | 0,01 pH i ± 0,01 pH | 0,01 pH i ± 0,01 pH |
| Conductivity range | 0 to 19,99, 199,9, 1999 μS / cm; 19,99 mS / cm | / |
| Resolution and accuracy | 0.05% full scale and ± 1% full scale + 1 LSD | / |
| Temperature range | 0,0 to 100,0 ° C | -10,0 to 110,0 ° C |
| Resolution and accuracy | 0,1 ° C i ± 0,5 ° C | 0,1 ° C i ± 0,3 ° C |
| Number of pH calibration points | Up to 3 points (pH 4.01, 7.00, 10.01) | Up to 5 points (pH 1.68, 4.01, 7.00, 10.01 and 12.45) |
| Number of conductivity calibration points | 4 (maximum 1 per range) | |
| Temperature compensation | Automatic / Manual (0 to 100 ° C) | Automatic / manual (0 to 100 ° C) |
| Cell constant | 1.0 | / |
| Temperature factor | 2,0% / ° C | / |
| Dissolved oxygen range | / | 0 to 19,9 mg / l lub ppm |
| Resolution and accuracy | / | 0.01 mg / l, 0.1 ppm and ± 1.5% of full scale |
| Salinity correction | / | 0,0 to 50,0 ppt |
| Correction of barometric pressure | / | 500 to 1499 mm Hg or 66,6 to 199,9 kPA |
| Special functions | Auto-Ranging; Stability Indicator; Self-Diagnostics; Hold & Auto-Power Off. |
Stability indicator; Self-diagnostics; Electrode characteristics; Backlit display; Hold and Auto-Power Off after 20 minutes. |
| Power supply requirements | 4x 1.4 V batteries,> 200 hours | / |
| Model | Temperature [° C] | Description |
|---|---|---|
| PC 10 | 0,0 to 100,0 ° C | -2 to 16,00 pH |
| PC 300 | -10,0 to 110,0 ° C | 0,00 to 14,00 pH |
You've added the item to quote