Testo 606 thermohygrometer with fixed sensors

The testo 606 hygrometer is used to measure the moisture content of wood and building materials as well as the environment. It allows easy control of storage and drying conditions of goods.

The testo 606-2 moisture meter takes moisture readings of various types of wood and building materials. The logger also calculates the dew point and wet thermometer temperature. This means that it is possible to measure not only the moisture content of wood, but also the relative humidity of the environment.

To measure the moisture content of raw materials, select the appropriate characteristic from the menu, then stick the measuring electrodes into the wood or other material to be measured built and read the result from the display (the result is expressed as a percentage related to the weight of the material in question).

The testo 606-1 meter can measure the moisture content of wood and building materials.

The testo 606-2 meter can measure humidity and temperature.

Characteristics for wood:
- Beech
- Spruce
- Larch
- Oak
- Pine
- Maple

Characteristics for building materials:

- Cement screed
- Concrete
- Plaster
- Anhydrite screed
- Cement mortar
- Lime mortar
- Brick

The kit includes the Testo 606-2 hygrometer, protective cap, belt case, factory calibration protocol, batteries.

Technical specification	testo 606
Measurement range	-10 to +50 °C
Accuracy	±0,5 °C
Resolution of temperature	0,1 °C
Humidity	0 to 100 %RH
Accuracy	±2,5 %RH (5 to 95 %RH)
Resolution	0,1 %RH
Wood/ Building moisture
Measurements	8.8 to 54.8% by weight; beech, spruce, larch, birch, cherry   7.0 to 47.9% by weight; oak, pine, maple, ash, douglas fir, meranti   0.9 to 22.1% by weight; cement screed, concrete   0.0 to 11.0% by weight; anhydrite screed   0.7 to 8.6% by weight; cement mortar   0.6 to 9.9% by weight; lime mortar, plaster   0.1 to 16.5% by weight; bricks
Dimensions	119 x 46 x 25 mm
Battery life	130 h
Weight	90 g