MW306 MAX portable conductivity meter
Choose Models for offer request
Intended
- IP67 waterproof housing
- Data logging
- Auto range function for EC and TDS measurements,automatically sets the most appropriate resolution for the sample under test
- LCD display
- Measurement of 4 parameters: EC, TDS, salinity and temperature
Characteristic
Available Models
Technical specification:
Model | MW306 MAX | |
Range | EC | 0,00 to 29,99 uS/cm; 30,0 to 299,9 uS/cm; 300 to 2999 uS/cm; 3,00 to 29,99 mS/cm; 30,0 to 200,0 mS/cm; to 500,0 mS/cm, absolute conductivity |
TDS | 0,00 to 14,99 ppm (mg/L); 15,0 to 149,9 ppm (mg/L); 150 to 1499 ppm (mg/L); 1,50 to 14,99 g/L; 15,0 to 100,0 g/l; to 400,0 g/l Absolute TDS* (at a factor of 0.80) | |
Salinity | 0,0 to 400,0 %NaCl; 2,00 to 42,00 PSU; 0,00 to 80,00 g/L | |
°C | -20,0 to 120,0°C | |
Resolution | EC | 0,01 uS/cm / 0,1 uS/cm / 1 uS/cm / 0,01 mS/cm / 0,1 mS/cm |
TDS | 0,01 ppm / 0,1 ppm / 1 ppm / 0,01 g/L / 0,1 g/L | |
Salinity | 0,1 % NaCl / 0,01 PSU / 0,01 g/L | |
°C | 0,1°C | |
Accuracy | EC | ± 1% of reading / ± 0.05 uS/cm or 1 digit, whichever is greater |
TDS | ±1% of reading / ±0.03 ppm or 1 digit, whichever is greater | |
Salinity | ± 1% of reading | |
°C | ±0,5°C | |
Temperature compensation | ATC - automatic, from -5 to 100°C; MTC - manual, from -20 to 120°C; NO TC - no compensation | |
Calibration EC/TDS | Single cell factor calibration, 6 standards: 84 uS/cm, 1413 uS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm / single point offset: 0.00 uS/cm | |
Salinity compensation | 1-point with solution for salinity calibration MA9066 | |
Sensor included EC | MA815D/1 | |
Function auto-off | selectable 5, 10, 30, 60 min. or off | |
Battery life | approximately 200 hours of use | |
Dimensions | 200 x 85 x 50 mm | |
Weight | 260g |
Model | Battery life |
---|---|
MW306 MAX | approximately 200 hours of use |
Check also