Testo 410-1 and 410-2 anemometer

TESTO 410-1 WINDMILL ANEMOMETER

• built-in fan with a diameter of 40 mm

• provides measurement of air velocity and temperature

• calculation of the degree of cooling caused by the wind

• includes hold and min/max function

The testo 410-1 is used to measure air flow and temperature. Anemometers of the 410-1 series are used for quick and spot measurements at air duct grilles. They also perform well in measurements made outdoors. It is possible to display measurement results in units of m/s, km/h, fpm, mph and kts. In addition, testo anemometers perform calculations of the degree of cooling caused by the wind and its strength on the Beaufort scale.

The small size of the device makes the testo 410-1 anemometer handy and great for taking quick measurements. Its measuring range provides the ability to measure low flow rates.

Advantages and features:

• includes a protective cap and wrist strap to protect the meter during transport and during measurements

• averaging function of measurement values - provides information about the average value of airflow

• Hold function - saves the current value of air flow and air temperature and allows to compare them

• max / min value function - obtains min and max values from the last time the meter was turned on or reset

• backlit display - ensures reading even in low light conditions

• units - ability to change units: for airflow and temperature: m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and cooling degree

Delivery includes:

• testo 410-1 

• protective cap

• wrist strap

• factory calibration protocol

• batteries

TESTO 410-2 WINDMILL ANEMOMETER

• built-in windmill with a diameter of 30 mm

• provides measurement of air velocity, temperature and humidity

• calculation of dew point, wet thermometer temperature, degree of cooling and wind strength in Beaufort scale

• includes hold and min / max function

The testo 410-2 is used for high-speed measurements in ventilation grilles and ducts (including outdoors). Anemometers of the 410-2 series provide measurements of humidity, temperature and airflow. In addition, they have functions for calculating: dew point, humidity thermometer temperature, wind strength on the Beaufort scale and degree of cooling.

The small size of the device ensures that the testo 410-2 anemometer works well for quick measurements. The measuring range of the device allows measuring low flow velocities. It is equipped with a humidity sensor and an NTC temperature sensor, which provides additional temperature and humidity measurements during the checks performed.

Advantages and features:

• includes a protective cap and wrist strap to protect the meter during transport and during measurements

• averaging function of measurement values - provides information about the average value of airflow

• Hold function - saves the current value of air flow and air temperature and allows to compare them

• max / min value function - obtains min and max values from the last time the meter was turned on or reset

• backlit display - ensures reading even in low light conditions

• units - changeable units: for air flow: m/s, km/h, fpm, mph, kts, Beaufort; for air temperature: °C, °F and degree of cooling; for humidity: % relative humidity, wet thermometer temperature and dew point temperature

Delivery includes:

• testo 410-2 wind anemometer

• protective cap

• wrist strap

• factory calibration protocol

• batteries