Mipolam Biocontrol Performance
Choose Models for offer request
- For laboratories and clean-rooms
- ISO 3 and Class A (GMP) certifications for use in clean rooms.
- Antistatic material
- Inert and resistant to the impact of microorganisms
- Dielectric material
- Bacteriostatic material
- Excellent resistance to chemicals.
- Good resistance to biodecontamination procedure: HPV...
- Prevents the growth of microorganisms on the floor
- High resistance to heavy traffic: forklifts...
1 - Surface protection
2 - Single layer 2 mm calendered PVC coating
Characteristic
Available Models
Mipolam Biocontrol Performance floors are ideal for use in laboratories and clean room type environments.
Mipolam Biocontrol Performance floors have been tested in accordance with standards:
ISO 14644-1 specifies the maximum allowable concentration of particulate matter in the range of 0.1 μm to 5.0 μm/m3, for each class of clean room under idle and operating conditions. Therefore, it is important to be aware of these limits and to limit the impact of building materials used in cleanrooms within this range. Result: ISO 3.
ISO 14698-1 GMP requires control of biological contamination.
In this aspect, it is important to know the behavior of microorganisms in contact with surfaces (floors, walls, etc.). Result: No bacterial growth on various Mipolam Biocontrol Performance floor coverings.
IN ACCORDANCE WITH ISO 14644-4, Annex E.2.1.4:
"The flooring should provide appropriate electrostatic characteristics." Result: Mipolam Biocontrol Performance floor coverings have insulating and antistatic properties.
ISO 14698-1 and GMP require control of biological contamination. In this aspect, it is important to know the potential impact of microorganisms in contact with surfaces (floors, walls, etc.). The result: Mipolam Biocontrol Performance floor coverings are inert.
According to ISO 14644-4, Annex E.2.1.4: "floors should be resistant to chemicals with which they come into contact during use (both cleaning and disinfection products and accidental spillage of process fluids)" Result: Very good resistance in the case of Mipolam Biocontrol Performance.
According to ISO 14644-4, Annex E.2.1.4: "The floor should have the required resistance to the specified static and dynamic loads." Result: Excellent resistance to heavy loads for Mipolam Biocontrol Performance floor coverings.
ISO 14698-1 and GMP require control of biological contamination. In this regard, it is important to know how effectively a surface can be decontaminated. Result: GMP Class A for Mipolam Biocontrol Performance floor coverings.
Mipolam Biocontrol Performance floors have been tested in accordance with standards:
ISO 14644-1 specifies the maximum allowable concentration of particulate matter in the range of 0.1 μm to 5.0 μm/m3, for each class of clean room under idle and operating conditions. Therefore, it is important to be aware of these limits and to limit the impact of building materials used in cleanrooms within this range. Result: ISO 3.
ISO 14698-1 GMP requires control of biological contamination.
In this aspect, it is important to know the behavior of microorganisms in contact with surfaces (floors, walls, etc.). Result: No bacterial growth on various Mipolam Biocontrol Performance floor coverings.
IN ACCORDANCE WITH ISO 14644-4, Annex E.2.1.4:
"The flooring should provide appropriate electrostatic characteristics." Result: Mipolam Biocontrol Performance floor coverings have insulating and antistatic properties.
ISO 14698-1 and GMP require control of biological contamination. In this aspect, it is important to know the potential impact of microorganisms in contact with surfaces (floors, walls, etc.). The result: Mipolam Biocontrol Performance floor coverings are inert.
According to ISO 14644-4, Annex E.2.1.4: "floors should be resistant to chemicals with which they come into contact during use (both cleaning and disinfection products and accidental spillage of process fluids)" Result: Very good resistance in the case of Mipolam Biocontrol Performance.
According to ISO 14644-4, Annex E.2.1.4: "The floor should have the required resistance to the specified static and dynamic loads." Result: Excellent resistance to heavy loads for Mipolam Biocontrol Performance floor coverings.
ISO 14698-1 and GMP require control of biological contamination. In this regard, it is important to know how effectively a surface can be decontaminated. Result: GMP Class A for Mipolam Biocontrol Performance floor coverings.
Model | Model |
---|---|
Biocontrol Performance ACACIA | BP-6027 |
Biocontrol Performance CALICO | BP-6008 |
Biocontrol Performance BLUE SKY | BP-6006 |
Biocontrol Performance GREY STONE | BP-6009 |
Biocontrol Performance SEA BLUE | BP-6016 |
Biocontrol Performance CLOUD | BP-6029 |
Biocontrol Performance SEA STORM | BP-6044 SEA STORM |
Biocontrol Performance BREEZE | BP-6031 |
Biocontrol Performance COTTON | BP-6001 |
Biocontrol Performance CLAY | BP-6041 |
Biocontrol Performance SUNSHINE | BP-6032 |
Biocontrol Performance PEBBLE | BP-6039 |
Biocontrol Performance SUNSET | BP-6035 |
Biocontrol Performance WOOD | BP-6043 |
Biocontrol Performance TOMATO | BP-6055 |
Check also